Powered by Spearhead Software Labs Joomla Facebook Like Button

KC 2/15 K2/10 as bale-out furnace with steel crucible for lead melting

KC 2/15

K 1/10 - K 4/13, KC 1/15 + KC 2/15

These compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not for KC) on the front of the furnace make exact dosing easy when pouring the melt. The furnaces are available for furnace chamber temperatures of 1000, 1300, or 1500 °C. This corresponds to melt temperatures of about 80-110 °C lower.

  • Tmax 1000 °C, 1300 °C, or 1500 °C, with melt temperature about 80 - 110 °C lower
  • Crucible sizes of 1, 2, or 4 liters
  • Crucible with integrated pouring spout of iso-graphite included with delivery
  • Spout (not for KC), mounted at the furnace for exact pouring
  • Compact bench-top design, simple emptying of crucible by tiltiing system with gas damper
  • Crucible for heating up of melting furnace insulated with a hinged lid, lid opened when pouring
  • Defined application within the constraints of the operating instructions

Additional equipment

  • Other crucible types available, e.g. steel
  • Design as bale-out furnace without tilting device, e.g. for lead melting
  • Over-temperature limiter for the furnace chamber with automatic reset to protect against overtemperature. The limit controller switches off the heating when the pre-set limit temperature has been reached and does not switch it on again until the temperature falls below the setting again.
  • Observation hole for melt
ModelTmaxCrucibleVolumeOuter dimensions in mmConnectedElectricalWeight
 °C in lWDHload kWconnection*in kg
K 1/10 1000 A 6 1.0 520 680 660 3.0 1-phase 85
K 2/10 1000 A10 2.0 520 680 660 3.0 1-phase 90
K 4/10 1000 A25 4.0 570 755 705 3.6 1-phase 110
                   
K 1/132 1300 A 6 1.0 520 680 660 3.0 1-phase 120
K 2/132 1300 A10 2.0 520 680 660 3.0 1-phase 125
K 4/132 1300 A25 4.0 570 755 705 5.5 3-phase1 170
                   
KC 1/153 1500 A6 1.0 580 630 580 10.5 3-phase 170
KC 2/153 1500 A10 2.0 580 630 580 10.5 3-phase 170
1Heating only between two phases *Please see page 60 for more information about supply voltage
2Outer dimensions of furnace, transformer in separate housing (500 x 570 x 300 mm)
3Switchgear and controller mounted in a floor standing cabinet

Ga naar boven